Hairstyles, Hair Care & Fashion

Uniform Layer - How To (3)

Previous Page
Step 12
Continue with vertical sections to behind the ear using the previous section as a guide.
uniform layer - step 12 uniform layer - step 13
Step 13
Repeat the same process on the other side. The internal shape will be slightly curved.
Step 14
Next work with the side areas. Create a horizontal section, then take vertical sections which you elevate and cut square to the head. The horizontal section allows you to achieve correct elevation and over directions.
uniform layer - step 14 uniform layer - step 15
Step 15
Repeat this process on the other side.
Step 16
Now refine the outline shape visually using free hand techniques.
uniform layer - step 16 uniform layer - step 17
Step 17
Next bring down the top section and start with a vertical section running from the front hairline through to the crown.
Step 18
Using the crown as a guide, cut a rounded line following the head shape. As his sections run towards the front headline Steve allows for length.
uniform layer - step 18 uniform layer - step 19
Step 19
Using the previous section as a guide and pivoting the section in the crown work horizontal sections towards the front hairline, over directing back to create length in the front.
Next Page
Subscribe to View Training Video