Step 4
Continue this process taking subsequent
parallel sections using the previous section
as a guide.
|
Step 5
Cross check your work.
|
Step 6
Repeat this process on the second side.
|
Step 7
Dry off and iron the worked panel, then
cross check and refine.
|
Step 8
Next, point into the internal shape to
diffuse the edge.
|
Step 9
Now work on the second tier in the middle
area using a vertical section. This tier is
disconnected from the underneath. Ensure
that the top of this section is cut shorter in
order that it does not lay over the previous
underneath panel, keeping the shape flat.
|
Step 10
Subsequent sections are worked vertically
using the same technique.
|
Step 11
Now cross check your work.
|
